$10.15
Original: $29.00
-65%3mm Width Nickel Tab with Adhesive Polymer Tape for Pouch Cell Terminal 40pcs/Box -PLiB-NTA3—
$29.00
$10.15The Story
3mm Width Nickel Tab as Negative Terminal for Polymer Li-ion Battery, 40pcs/Box
Material: Nickel 99.99% (horizontal polymer strip is made of modified polypropylene (PP) and polyethylene naphthalate (PEN))
Length: 60mm ±1.0
Width: 3mm ±0.1
Thickness: 0.1mm ±0.015 in Nickel Tab
0.28mm in Nickel Tab with Adhesive Polymer Tape
Adhesive Polymer Tape is attached on the tab for immediate hot sealing (Size: 8 mm L * 5 mm W * 0.1 mm Thickness)
0.28mm in Nickel Tab with Adhesive Polymer Tape
Adhesive Polymer Tape is attached on the tab for immediate hot sealing (Size: 8 mm L * 5 mm W * 0.1 mm Thickness)
Application: Connect to anode current collector as polymer battery negative terminal
Net Weight: 160mg/pcs
Gross Weight: 19.01g (Tabs with Box)
Max. Loading Current: 3A
Suggested Sealing Method (parameter below may vary from case to case):
Max. Loading Current: 3A
Suggested Sealing Method (parameter below may vary from case to case):
- Soft type heat-sealing blade (Blade with rubber, see MSK-140)
- 180-200C for upper blade
- 160-180C for lower blade
- 40PSI (0.3Mpa)
- 3 seconds heating time
Adhesive Polymer Tape on the tab allows for immediate hot sealing
|
Click the picture below to see polymer battery with tab:  |
Click below video to see how to weld the tab onto the current collector of the electrode: Click the link here to see MSK-800 |
Click the video below to see how to heat sealing the tab onto pouch cell case after the welding:
 
|
Description
3mm Width Nickel Tab as Negative Terminal for Polymer Li-ion Battery, 40pcs/Box
Material: Nickel 99.99% (horizontal polymer strip is made of modified polypropylene (PP) and polyethylene naphthalate (PEN))
Length: 60mm ±1.0
Width: 3mm ±0.1
Thickness: 0.1mm ±0.015 in Nickel Tab
0.28mm in Nickel Tab with Adhesive Polymer Tape
Adhesive Polymer Tape is attached on the tab for immediate hot sealing (Size: 8 mm L * 5 mm W * 0.1 mm Thickness)
0.28mm in Nickel Tab with Adhesive Polymer Tape
Adhesive Polymer Tape is attached on the tab for immediate hot sealing (Size: 8 mm L * 5 mm W * 0.1 mm Thickness)
Application: Connect to anode current collector as polymer battery negative terminal
Net Weight: 160mg/pcs
Gross Weight: 19.01g (Tabs with Box)
Max. Loading Current: 3A
Suggested Sealing Method (parameter below may vary from case to case):
Max. Loading Current: 3A
Suggested Sealing Method (parameter below may vary from case to case):
- Soft type heat-sealing blade (Blade with rubber, see MSK-140)
- 180-200C for upper blade
- 160-180C for lower blade
- 40PSI (0.3Mpa)
- 3 seconds heating time
Adhesive Polymer Tape on the tab allows for immediate hot sealing
|
Click the picture below to see polymer battery with tab: |
Click below video to see how to weld the tab onto the current collector of the electrode: Click the link here to see MSK-800 |
Click the video below to see how to heat sealing the tab onto pouch cell case after the welding:
|
