Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115
HomeStore

Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115

Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115

$90.30

Original: $258.00

-65%
Aluminum Laminated Film for Pouch Cell Case, 100mm W x 115mm L 100pcs/Bag - EQ-ALF-100-115—

$258.00

$90.30

The Story

This aluminum laminated film (111 um) is used as casing material for polymer Li-Ion battery, 100 pcs/Bag.

Specifications

Layers from outside to inside

(Material in bracket)

  • Polyamide (JIS Z1714): 0.025mm(+-0.0025mm)
  • Adhesive (Polyester-polyurethane): 4-5g/m2
  • Aluminum foil (JIS A8021): 0.040mm(+-0.004mm)
  • Adhesive (Urethane-free Adhesive): 2-3g/m2
  • Polypropylene: 0.040mm(+-0.004mm)

Thickness:

  • 113μm±11μm

Width

  • 100mm

Length

  • 115mm

Surface quality

  • Mat finish

Pinholes

  • Subject to the applicable aluminum foil standard

Impurity

  • 1mm or less in diameter

Fish eye

  • 2mm or less in diameter(clear)
  • 1mm or less in diameter(colored) 

Moisture Vapor / O2 Transmission Rate
  • 200ppm / 5 years @ 300K

Laminate strength

  • Nylon/Al more than 2N/15mm
  • Al/CPP more than 5N/15mm

Heat seal strength

  • More than 29.4N/15mm wide at 200x 0.2Mpa x2 sec by MTI's heat sealing
  • equipment MSK-140 and MSK-115A (Updated from VS-300)

Remained solvent

  • Less than 5mg/m2

Appearance

  • Within the sample of the limit

Slip factor

  • CPP/CPP less than 1.0



Video
Click the picture to see the finished polymer Li-ion Battery made by heated Sealer
Click the video to see how to make pouch cell

 

 

 

 

Description

This aluminum laminated film (111 um) is used as casing material for polymer Li-Ion battery, 100 pcs/Bag.

Specifications

Layers from outside to inside

(Material in bracket)

  • Polyamide (JIS Z1714): 0.025mm(+-0.0025mm)
  • Adhesive (Polyester-polyurethane): 4-5g/m2
  • Aluminum foil (JIS A8021): 0.040mm(+-0.004mm)
  • Adhesive (Urethane-free Adhesive): 2-3g/m2
  • Polypropylene: 0.040mm(+-0.004mm)

Thickness:

  • 113μm±11μm

Width

  • 100mm

Length

  • 115mm

Surface quality

  • Mat finish

Pinholes

  • Subject to the applicable aluminum foil standard

Impurity

  • 1mm or less in diameter

Fish eye

  • 2mm or less in diameter(clear)
  • 1mm or less in diameter(colored) 

Moisture Vapor / O2 Transmission Rate
  • 200ppm / 5 years @ 300K

Laminate strength

  • Nylon/Al more than 2N/15mm
  • Al/CPP more than 5N/15mm

Heat seal strength

  • More than 29.4N/15mm wide at 200x 0.2Mpa x2 sec by MTI's heat sealing
  • equipment MSK-140 and MSK-115A (Updated from VS-300)

Remained solvent

  • Less than 5mg/m2

Appearance

  • Within the sample of the limit

Slip factor

  • CPP/CPP less than 1.0



Video
Click the picture to see the finished polymer Li-ion Battery made by heated Sealer
Click the video to see how to make pouch cell