1750°C Kanthal Super MoSi2 Heating Element - 460mm L - KSKSL-1800-XXL-LD
HomeStore

1750°C Kanthal Super MoSi2 Heating Element - 460mm L - KSKSL-1800-XXL-LD

1750°C Kanthal Super MoSi2 Heating Element - 460mm L - KSKSL-1800-XXL-LD

$1,095.00
1750°C Kanthal Super MoSi2 Heating Element - 460mm L - KSKSL-1800-XXL-LD—
$1,095.00

The Story

Specifications
  • Materials: MoSi2
  • Max. surface temperature: 1800°C
  • Working furnace temperature: 1750°C
  • A  (Distance between two shanks) : 30 mm (1.18")
  • D1 (Terminal Diameter) : 12 mm (0.47")
  • D2  (Heating Zone Diameter): 6 mm (0.23")
  • L1  (Terminal Length): 260 mm (7.87")
  • L2  (Heating Zone Length): 200 mm (6.30")
Applications
  • Replace heating elements for MTI's KSL-1700X-KA3 muffle furnace.  
  • Please click here to review detail specification 
Installation When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
Warning
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them. 
No warranty will be issued for damage caused by improper installation.
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI.
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use. 

1750°C Kanthal Super MoSi2 Heating Element - 460mm L - KSKSL-1800-XXL-LD - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

Specifications
  • Materials: MoSi2
  • Max. surface temperature: 1800°C
  • Working furnace temperature: 1750°C
  • A  (Distance between two shanks) : 30 mm (1.18")
  • D1 (Terminal Diameter) : 12 mm (0.47")
  • D2  (Heating Zone Diameter): 6 mm (0.23")
  • L1  (Terminal Length): 260 mm (7.87")
  • L2  (Heating Zone Length): 200 mm (6.30")
Applications
  • Replace heating elements for MTI's KSL-1700X-KA3 muffle furnace.  
  • Please click here to review detail specification 
Installation When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
Warning
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them. 
No warranty will be issued for damage caused by improper installation.
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI.
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use.