1800°C Kanthal Super 1900 MoSi2 Heating Element -360mm L - for KSL1800X-KA3 Furnace - KSKSL-1900-L-LD
HomeStore

1800°C Kanthal Super 1900 MoSi2 Heating Element -360mm L - for KSL1800X-KA3 Furnace - KSKSL-1900-L-LD

1800°C Kanthal Super 1900 MoSi2 Heating Element -360mm L - for KSL1800X-KA3 Furnace - KSKSL-1900-L-LD

$1,598.86
1800°C Kanthal Super 1900 MoSi2 Heating Element -360mm L - for KSL1800X-KA3 Furnace - KSKSL-1900-L-LD—
$1,598.86

The Story

Specifications
  • Materials: MoSi2
  • Working Temperature: max. 1850°C (3360 oF)
  • A  (Distance between two shanks) : 30 mm (1.18")
  • D1 (Terminal Diameter) : 12 mm (0.47")
  • D2  (Heating Zone Diameter): 6 mm (0.23")
  • L1  (Terminal Length): 200 mm (7.87")
  • L2  (Heating Zone Length): 160 mm (6.30")
  • Please click here to see data sheet of Super-1900 heating element.
  • Tensile strength: 100Mpa +/- 25% at 1550oC (2820 oF)
  • Bend strength: 450 Mpa +/- 10% at 20 oC (68 oF)
  • Compression strength: 1400 -1500 Mpa +/- 10% at 20 oC (68 oF)
  • Fracture Toughness: KIC, at 20 oC (68 oF)   3-4 Mpam1/2
  • Vickers-hardness (HV): 9 Gpa at 20 oC (68 oF) 
  • Density: 6.5 g/cm3
  • Porosity: <1%
  • Coefficient of liner expansion: 7-8 10 -6 K -1     
  • Specific heat capacity: 0.42 kJ kg -1 K -1 at  20 oC (68 oF)
  • Emissivity: 0.70-0.80  
Applications
  • Replace heating elements for MTI's KSL-1800-KA3 muffle furnace.  
Installation When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
Warning
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them. 
No warranty will be issued for damage caused by improper installation.
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI.
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use. 

 


1800°C Kanthal Super 1900 MoSi2 Heating Element -360mm L - for KSL1800X-KA3 Furnace - KSKSL-1900-L-LD - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

Specifications
  • Materials: MoSi2
  • Working Temperature: max. 1850°C (3360 oF)
  • A  (Distance between two shanks) : 30 mm (1.18")
  • D1 (Terminal Diameter) : 12 mm (0.47")
  • D2  (Heating Zone Diameter): 6 mm (0.23")
  • L1  (Terminal Length): 200 mm (7.87")
  • L2  (Heating Zone Length): 160 mm (6.30")
  • Please click here to see data sheet of Super-1900 heating element.
  • Tensile strength: 100Mpa +/- 25% at 1550oC (2820 oF)
  • Bend strength: 450 Mpa +/- 10% at 20 oC (68 oF)
  • Compression strength: 1400 -1500 Mpa +/- 10% at 20 oC (68 oF)
  • Fracture Toughness: KIC, at 20 oC (68 oF)   3-4 Mpam1/2
  • Vickers-hardness (HV): 9 Gpa at 20 oC (68 oF) 
  • Density: 6.5 g/cm3
  • Porosity: <1%
  • Coefficient of liner expansion: 7-8 10 -6 K -1     
  • Specific heat capacity: 0.42 kJ kg -1 K -1 at  20 oC (68 oF)
  • Emissivity: 0.70-0.80  
Applications
  • Replace heating elements for MTI's KSL-1800-KA3 muffle furnace.  
Installation When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
Warning
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them. 
No warranty will be issued for damage caused by improper installation.
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI.
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use. 

 


You may also like

-65%NEW
Thumbnail 1

Inert Gas Regulator, Two Stage Brass 0-100 psi Analytical Cylinder Regulator - CGA-580-LD

$1,090.00

$381.50

-65%NEW
Thumbnail 1

PPM Grade Dual Column Inert Gas Purifier with Regeneration Heater (Removing O2 & H2O to PPM) - GPH-DHDO

$2,998.00

$1,049.30

-65%NEW
Thumbnail 1

TE CONNECTIVITY CIRCUIT BREAKER, HYD-MAG, 2P, 277V, 40A -FA-F-40A-UL-LD

$61.95

$21.68

-65%NEW
Thumbnail 1Thumbnail 2

Seamless Stainless Steel Tube: 1/4" OD x79"L (2000mm) for Gas Delivery (2 pcs/package) - SS14Tube

$130.00

$45.50

NEW
Thumbnail 1

Teflon gas delivery tube, per ft, FA-PTFE-14D

$2.55

NEW
Thumbnail 1

Fuse Holder for cylinder type fuse - FA-FH-4A-UL-LD

$19.00

NEW
Thumbnail 1

COOPER BUSSMANN - DCM-4 - FUSE, 4A, 600V, FAST ACTING - FA-F-4A-UL-LD

$39.00

-65%NEW
Thumbnail 1Thumbnail 2

TC Contactor, AC3 32A/15KW - TC1D3210-LD

$96.00

$33.60

-65%NEW
Thumbnail 1

Multi-functional flange cap for VBF-1200X-H8-UL, MTI-VBFH8-FC

$99.95

$34.98

-65%NEW
Thumbnail 1

Hex Bit Socket M14 of Torque wrench for CF flange installation CFTQ-M14

$49.00

$17.15

-65%NEW
Thumbnail 1

UNION HAND VALVE FOR 12mmOD TUBING VENTING TYPE, MTI-KJ-VLV12

$18.00

$6.30

-65%NEW
Thumbnail 1

HN Female Connector .906 inch Hole Spacing for VTC-1RF and VTC-2RF, MTI-PE4183

$49.99

$17.50