$268.00
Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiMn0.6Fe0.4PO4 (LMFP, 241mm L x 180mm W ), 5 sheets/bag - bcaf-lmfpds—
$268.00
The Story
This electrode sheet is based on Aluminum foil coated by LiMn0.6Fe0.4PO4 (LMFP) on double sides and mainly used as the cathode of Li-Ion battery - 5 sheets /bag
SPECIFICATIONS
-
Current collector (substrate): Aluminum foil (16 microns)
-
Cathode material: LiMn0.6Fe0.4PO4 (LMFP)
- Electrode Dimension: 241mm x 180mm L
- Coated Area: 241mm x 150mm W ( The edge width of blank area is 15 mm for each side)
- Double Side Coating Area Density: 28.0 ± 0.4 mg/cm2
- Compaction Density of Coating: 2.3 ± 0.1 g/cm3
- Coating thickness: ~68 um
- Total Thickness: ~151 um (after hot calendaring)
- Active Material Ratio in powder: 94.9% (PVDF and Super P is 2% and 2.6%, respectively)
- Specific Capacity: 140 mAh/g (Area Capacity: 1.932 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
- Charging and Discharging Curve for the First Cycle
- Note: Please vacuum heated dry (80-100oC) before assembling the battery
for aluminum
for LiFePO4
Description
This electrode sheet is based on Aluminum foil coated by LiMn0.6Fe0.4PO4 (LMFP) on double sides and mainly used as the cathode of Li-Ion battery - 5 sheets /bag
SPECIFICATIONS
-
Current collector (substrate): Aluminum foil (16 microns)
-
Cathode material: LiMn0.6Fe0.4PO4 (LMFP)
- Electrode Dimension: 241mm x 180mm L
- Coated Area: 241mm x 150mm W ( The edge width of blank area is 15 mm for each side)
- Double Side Coating Area Density: 28.0 ± 0.4 mg/cm2
- Compaction Density of Coating: 2.3 ± 0.1 g/cm3
- Coating thickness: ~68 um
- Total Thickness: ~151 um (after hot calendaring)
- Active Material Ratio in powder: 94.9% (PVDF and Super P is 2% and 2.6%, respectively)
- Specific Capacity: 140 mAh/g (Area Capacity: 1.932 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
- Charging and Discharging Curve for the First Cycle
- Note: Please vacuum heated dry (80-100oC) before assembling the battery
for aluminum
for LiFePO4
