Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by LiFePO4 (LFP, 241mm L x 200mm W x 84um Thickness) 5 sheets/bag - bcaf-lpfss

This electrode sheet is based on Aluminum foil coated by lithium iron phosphate (LiFePO4, LFP) in single side and is used as the cathode of Li-Ion battery - 5 sheets /bag
Note: This electrode sheets and its parameters were updated from Oct. 2023.

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium ferrous phosphate (coated by carbon)
• Length: 241mm, Width: 175mm ( The edge width of blank area is 12.5 mm for each side)
• Single Side Coating Area Density: 13.5±0.2 mg/cm2
• Compaction Density of Coating: 2.0±0.1g/cm3
• Current Collector Area Density: 4.22 mg/cm2
• Coating thickness: ~68 um
• Total Thickness: ~84 um (after hot calendaring)
• Active Material Weight: 5.43 g
• Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
• Specific Capacity: 150 mAh/g
• Charging and Discharging Curve for the First Cycle
• Note: Please vacuum heated dry (100oC) before assembling the battery