Automatically Pellet Pressing System (12 set 10 mm ID Dies up to 24T) - AM-24T-12
HomeStore

Automatically Pellet Pressing System (12 set 10 mm ID Dies up to 24T) - AM-24T-12

Automatically Pellet Pressing System (12 set 10 mm ID Dies up to 24T) - AM-24T-12

$51,094.75

Original: $145,985.00

-65%
Automatically Pellet Pressing System (12 set 10 mm ID Dies up to 24T) - AM-24T-12—

$145,985.00

$51,094.75

The Story

AM-YLJ-24T-12 is an automatic pellet pressing system operated by a remote PC and a robotic arm. It can press 12 pellets of 0.5" diameter autonomously within 2 hours.


SPECIFICATIONS:

Dry pressing die
  • Material: Die Steel (HRC60-62)
  • Standard: 12 sets of 10 mm diameter dies are included
  • Max pressure: 3000 MPa
  • Optional at extra cost: 8 mm, 12 mm, or 12.75 mm die

Electric Hydraulic Press
  •  Max. load 24 metric tones
  • Click the picture left to see details of the specification
  • 40 Tone press machine is available upon request

Robotic Arm
  • One robotic arm is built in  
  • Click the picture left to see details of the specification
Programmable & Remote Control
  • One brand new laptop with operation software preinstalled is included
Extended Warranty
  • Extended warranty is available up to 5 years at extra cost)
Compliance
  • CE Certified
  • NRTL certification is available upon request at the extra cost
Operation Procedures
  • Program operation procedure in PC - including pressing pressure, holding time, and die cleaning time.
  • Place 12 kinds of pre-mixed and calcined powders in a tray on the table
  • Place 12 pre-cleaned dry-pressing dies into the holder on the table
  • Push the button of " start " on the PC, then
  • The robotic arm will finish the operation, including
    • Feeding power into the die, 
    • Pressing powder into the pellet via the electric hydraulic press
    • Push the densified pellet out from the die
    • Put the densified pellet into a crucible 
  •  Repeat the above procedure one by one until 12 pellets finish for future sintering
  • Time-consuming: 120 - 130 minutes to finish 12 pellets

 

Automatically Pellet Pressing System (12 set 10 mm ID Dies up to 24T) - AM-24T-12 - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Automatically Pellet Pressing System (12 set 10 mm ID Dies up to 24T) - AM-24T-12 - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

AM-YLJ-24T-12 is an automatic pellet pressing system operated by a remote PC and a robotic arm. It can press 12 pellets of 0.5" diameter autonomously within 2 hours.


SPECIFICATIONS:

Dry pressing die
  • Material: Die Steel (HRC60-62)
  • Standard: 12 sets of 10 mm diameter dies are included
  • Max pressure: 3000 MPa
  • Optional at extra cost: 8 mm, 12 mm, or 12.75 mm die

Electric Hydraulic Press
  •  Max. load 24 metric tones
  • Click the picture left to see details of the specification
  • 40 Tone press machine is available upon request

Robotic Arm
  • One robotic arm is built in  
  • Click the picture left to see details of the specification
Programmable & Remote Control
  • One brand new laptop with operation software preinstalled is included
Extended Warranty
  • Extended warranty is available up to 5 years at extra cost)
Compliance
  • CE Certified
  • NRTL certification is available upon request at the extra cost
Operation Procedures
  • Program operation procedure in PC - including pressing pressure, holding time, and die cleaning time.
  • Place 12 kinds of pre-mixed and calcined powders in a tray on the table
  • Place 12 pre-cleaned dry-pressing dies into the holder on the table
  • Push the button of " start " on the PC, then
  • The robotic arm will finish the operation, including
    • Feeding power into the die, 
    • Pressing powder into the pellet via the electric hydraulic press
    • Push the densified pellet out from the die
    • Put the densified pellet into a crucible 
  •  Repeat the above procedure one by one until 12 pellets finish for future sintering
  • Time-consuming: 120 - 130 minutes to finish 12 pellets