Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB
HomeStore

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB

$4,198.25

Original: $11,995.00

-65%
Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB—

$11,995.00

$4,198.25

The Story

OTF-1200X-S-FB is a single zone vertical fluidized tube furnace with an alloy tube and a secondary powder feeder, up to 3 bar.  It is designed for lab-scale fludized-bed reactor at temperature <1100°C

Features
  • Up to 1100°C
  • 200 mm heating length
  • SS310 or Nickel-based superalloy tube
  • Up to 3 bar, 43.5 psig
  • Secondary powder feeder

Power
  • Voltage:  AC 110V 60HZ  ( 2208 - 240VAC is available upon request )
  • Power：1.2KW
  • Working Pressure:                             -0.1 ~ 0.3MPa (1100℃)
  • Maximum Temperature：                  1100℃（≤30min）
  • Continuous Working Temperature：  1000℃
  • Recommend Heating Rate：              ≤10℃/min
  • Heating Zone：                                   200mm
  • Thermocouple：                                 K Type
Heating furnace
  • Fibrous alumina for thermal insulation
  • Double-layer steel structure with air cooling
  • Vertical Split door design for easy installation of tube
  • Separated temperature control unit 
Processing tube



Note:

If remove the feeder and add hi-pressure fitting,

the Max. working pressure can be increased to 10 MPa.
  • Nickel base super-alloy tube with flanges. φ30 OD x φ12 IDX 600 L mm
  • One mechanical pressure gauge(-0.1-0.3MPa) pre-installed,
  • The pre-installed Safety relief valve will turn on automatically once the pressure reaches 0.3Mpa (Pic.1)
  • One Ni alloy mesh is installed inside the tube center to carry two layers of materials (Pic. 2 &3)
Pic. 1Pic. 2Pic.3
  • A re-feeder connects the tube with a KF25 port on the tube( which is limited pressure to Max. 3 bars)
  • Three different materials can be filled in the re-feeder at the same time by filling into different zones. (50ml each zone) via KF25 adaptor
  •  

Temperature Controller
  • 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
  • Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
  • Over-temperature protection and alarm allow for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy

Dimensions
340mm×220mm×1200mm ( L x W x H)

Net Weight

~40 Kg

Laptop & software (Optional)
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (MTS01)enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces

Compliance
  • CE Certified
  • NRTL or CSA certification is available at an extra cost

Warning
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.

 

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 12mm ID Super-Alloy Tube - OTF-1200X-S-SB - Image 4

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

OTF-1200X-S-FB is a single zone vertical fluidized tube furnace with an alloy tube and a secondary powder feeder, up to 3 bar.  It is designed for lab-scale fludized-bed reactor at temperature <1100°C

Features
  • Up to 1100°C
  • 200 mm heating length
  • SS310 or Nickel-based superalloy tube
  • Up to 3 bar, 43.5 psig
  • Secondary powder feeder

Power
  • Voltage:  AC 110V 60HZ  ( 2208 - 240VAC is available upon request )
  • Power：1.2KW
  • Working Pressure:                             -0.1 ~ 0.3MPa (1100℃)
  • Maximum Temperature：                  1100℃（≤30min）
  • Continuous Working Temperature：  1000℃
  • Recommend Heating Rate：              ≤10℃/min
  • Heating Zone：                                   200mm
  • Thermocouple：                                 K Type
Heating furnace
  • Fibrous alumina for thermal insulation
  • Double-layer steel structure with air cooling
  • Vertical Split door design for easy installation of tube
  • Separated temperature control unit 
Processing tube



Note:

If remove the feeder and add hi-pressure fitting,

the Max. working pressure can be increased to 10 MPa.
  • Nickel base super-alloy tube with flanges. φ30 OD x φ12 IDX 600 L mm
  • One mechanical pressure gauge(-0.1-0.3MPa) pre-installed,
  • The pre-installed Safety relief valve will turn on automatically once the pressure reaches 0.3Mpa (Pic.1)
  • One Ni alloy mesh is installed inside the tube center to carry two layers of materials (Pic. 2 &3)
Pic. 1Pic. 2Pic.3
  • A re-feeder connects the tube with a KF25 port on the tube( which is limited pressure to Max. 3 bars)
  • Three different materials can be filled in the re-feeder at the same time by filling into different zones. (50ml each zone) via KF25 adaptor
  •  

Temperature Controller
  • 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
  • Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
  • Over-temperature protection and alarm allow for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy

Dimensions
340mm×220mm×1200mm ( L x W x H)

Net Weight

~40 Kg

Laptop & software (Optional)
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (MTS01)enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces

Compliance
  • CE Certified
  • NRTL or CSA certification is available at an extra cost

Warning
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.