1500℃ Compact Automatic Bottom Loading Furnace (6 x 6 x 6", L x D x H) - KSL1500XBSA
HomeStore

1500℃ Compact Automatic Bottom Loading Furnace (6 x 6 x 6", L x D x H) - KSL1500XBSA

1500℃ Compact Automatic Bottom Loading Furnace (6 x 6 x 6", L x D x H) - KSL1500XBSA

$15,998.00
1500℃ Compact Automatic Bottom Loading Furnace (6 x 6 x 6", L x D x H) - KSL1500XBSA—
$15,998.00

The Story

KSL1500XBSA is a compact automatic bottom-loading furnace controlled by a laptop with a 6 x 6 x 6" heating chamber and max. working temperature of 1500 °C. The compact furnace can be placed in a standard glovebox and can be connected to a robot to achieve fully automated operation in an autonomous material research laboratory. Cooling fans are installed in the lower chamber to cool off the sample when it is lowered from the heated chamber.

SPECIFICATIONS

Power
  • 208 - 240 VAC, 50/60 Hz, single phase
  • Max. Power: 6 kW
  • Note: Power cable is included without plugs. The power plug would need to be installed by the user according to the lab requirements. 
  • KF40 feedthrough with a power cord for gloveboxes is available upon request at extra cost.

Heating chamber
  • 150mm(W) x 150mm(L) x 150mm(H), ( 6"x6"x6")
  • 1500°C grade SiC heating elements
  • Capacity： 3 Liters or 0.1 cubic ft
  • Thermocouple: S-type
Furnace Opening Clearance
  • 150mm Maximum
Working Temperature
  • 1400 °C, continuously
  • 1500 °C, < 30 minutes
  • Heating Rate: 10°C / minute

Temperature Controller
  • PID automatic control and auto-tune function
  • 50 programmable segments for precise control
  • Built-in protection for overheating or a broken thermocouple
  • Large digital control panel (48 x 96 mm) for easy operation
  • Temperature accuracy: +/- 1 °C
Remote Computer Control Software
(Optional at Extra Cost)
  • Temperature profile: heating, dwell time, and cooling up to 50 segments with accuracy +/- 1°C
  • The bottom door will be closed after sample loading and opened after the heating program is finished.
  • RJ45 communication interface connects to a PC or a wireless router
  • The communication protocol is open to existing customers, allowing the connection of equipment with robots for unmanned operation.
  • Computer operation software is ONLY sold and pre-installed on a tested computer as a kit
  • Controls multiple units at the same time

Fast Cooling
  • Cooling fans are installed in the lower chamber to cool off the sample when it is lowered from the heated chamber.
  • Cooling rate may reach 20°C/Sec (1200°C/minute)

Compliance
  • NRTL or CSA certification is available upon request at extra cost.

 

1500℃ Compact Automatic Bottom Loading Furnace (6 x 6 x 6", L x D x H) - KSL1500XBSA - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

KSL1500XBSA is a compact automatic bottom-loading furnace controlled by a laptop with a 6 x 6 x 6" heating chamber and max. working temperature of 1500 °C. The compact furnace can be placed in a standard glovebox and can be connected to a robot to achieve fully automated operation in an autonomous material research laboratory. Cooling fans are installed in the lower chamber to cool off the sample when it is lowered from the heated chamber.

SPECIFICATIONS

Power
  • 208 - 240 VAC, 50/60 Hz, single phase
  • Max. Power: 6 kW
  • Note: Power cable is included without plugs. The power plug would need to be installed by the user according to the lab requirements. 
  • KF40 feedthrough with a power cord for gloveboxes is available upon request at extra cost.

Heating chamber
  • 150mm(W) x 150mm(L) x 150mm(H), ( 6"x6"x6")
  • 1500°C grade SiC heating elements
  • Capacity： 3 Liters or 0.1 cubic ft
  • Thermocouple: S-type
Furnace Opening Clearance
  • 150mm Maximum
Working Temperature
  • 1400 °C, continuously
  • 1500 °C, < 30 minutes
  • Heating Rate: 10°C / minute

Temperature Controller
  • PID automatic control and auto-tune function
  • 50 programmable segments for precise control
  • Built-in protection for overheating or a broken thermocouple
  • Large digital control panel (48 x 96 mm) for easy operation
  • Temperature accuracy: +/- 1 °C
Remote Computer Control Software
(Optional at Extra Cost)
  • Temperature profile: heating, dwell time, and cooling up to 50 segments with accuracy +/- 1°C
  • The bottom door will be closed after sample loading and opened after the heating program is finished.
  • RJ45 communication interface connects to a PC or a wireless router
  • The communication protocol is open to existing customers, allowing the connection of equipment with robots for unmanned operation.
  • Computer operation software is ONLY sold and pre-installed on a tested computer as a kit
  • Controls multiple units at the same time

Fast Cooling
  • Cooling fans are installed in the lower chamber to cool off the sample when it is lowered from the heated chamber.
  • Cooling rate may reach 20°C/Sec (1200°C/minute)

Compliance
  • NRTL or CSA certification is available upon request at extra cost.